Difference between revisions of "Fatty spue - Fat marks on leather"

From www.leather-dictionary.com - The Leather Dictionary
Jump to: navigation, search
Line 96: Line 96:
 
<p>&nbsp;</p>
 
<p>&nbsp;</p>
  
<werbebanner />
+
<p align=center>
 +
[[bild:Fatty-spue-chair-2018-06-01.jpg|500px]]
 +
</p>
 +
<p align=center>
 +
''Fat marks on back of a chair. All leather sections are not always equally affected.''<br></p>
 +
<p>&nbsp;</p>
  
 
==Testing fatty spue==
 
==Testing fatty spue==

Revision as of 19:20, 7 February 2022

LEATHER-DICTIONARY.jpg


Fatty spue

"Fatty spue" is a type of stain caused when residual fat from the leather reacts to fluctuations in temperature and humidity. It appears as a whitish patina or coating, which at first glance looks like white mould. The causes of fat or grease marks on the leather surface are different and affect several steps in the tanning process. Inadequate degreasing of natural fats in the skin, as well as the oils and fats used for rehydration can lead to fat rashes.

Fatty spue emerges almost exclusively on leather clothing and leather bags. Car interiors, shoes and upholstery leathers are rarely affected.

Unfortunately for the tanner, this phenomenon does not arise immediately after the production of the leather, but weeks later. Most of it happens in transit or when the leather items are packed in plastic. Changes in humidity play a big role and once fatty spue shows up on the surface, it will keep appearing, despite regular cleaning.


Fettausschlag-Leder.jpg

Unlike with mould, heating can make fat temporarily invisible.

 

There are two main circumstances where fatty spue is most likely to occur. Firstly, fat marks are common in new leather which has been manufactured in Asia and transported in containers over long distances. If the goods have been packed in plastic in areas of high humidity, this will cause the excess fats to sweat out. In most cases, the complete shipment is affected.

The second scenario involves old leathers that have been treated with waxy care products. Excess sweating can occur when temperatures or humidity go up, leaving fatty marks.

Often fatty spue is mistaken for mould. There is a simple test for differentiating between the two. If you apply a hair dryer to the affected area, the wax or grease melts and disappears temporarily, whereas mould would remain unchanged.

Light fat marks can be kept under control with this method. After a single treatment with the hair dryer, the fat will have almost disappeared as it reacts quickly to heat.


Leather fat marks 01.jpg Leather fat marks 02.jpg

After one-time treatment with the hair dryer, the greasiness is almost gone. Grease on leather reacts quickly to heat.

 

For treating light fat stains on water-resistant leathers, the following procedure is recommended: Clean the leather with a mixture 1:10 of COLOURLOCK LEDER FEIN LEATHER AND FUR WASH CONCENTRATE and water. Apply thin layers of the solution using a wet cloth and let dry on its own or use a hair dryer to speed up the process. Protect the surface with the COLOURLOCK LEDER FEIN LEATHER CARE AND WATERPROOFING OIL. Although this cannot guarantee that the problem will not reoccur, this method is much faster than the constant blow drying and wiping. More solid fat or wax which causes the stain is diluted gradually and loses its effect.


Fetthandschuh.jpg Schuhe-Fettausschlag-02.jpg

Fatty spue on gloves made of suede and on shoes, both from Asian containers.

 

Fettausschlag.jpg Ausschlag3.jpg

Fatty spue on a satchel.

 

Ausschlag5.jpg Pistolentasche08.jpg

Fatty spue caused by excess care product treatment of old leather: Saddlebag and pistol holster.

 

Toyota01-01-2008.jpg


Fettausschlag VW Beetle Cabrio 01.jpg Mini Schweiz 02 02 2009.jpg

Cars with fat marks: Toyota, BMW Mini, VW Beetle.

 

Moebel-Fettausschlag.JPG Moebel-Fettausschlag-01.jpg

In the last few years, the problems of fat marks on leather furniture have increased.

 

Möbel-Fettausschlag-01-2012.jpg Möbel-Fettausschlag-02-2012.jpg Flecken-Möbel-merkwürdig-05.jpg

At first glance not clear, but tests revealed they were fat marks.

 

Fatty-spue-chair-2018-06-01.jpg

Fat marks on back of a chair. All leather sections are not always equally affected.

 

Testing fatty spue

This test has been developed by Gerber Anderas Ollert. Even if he was not scientifically verified, his testing work has always been helpful.

  1. Add 50-100 ml of tap water in a 500ml lab beaker with a large opening.
  2. Cut a piece of leather to be tested so it fits the beaker. Fix the leather with a rubber band over the opening of the beaker. The leather piece should also fit into the container.
  3. Place the leather with the grain side upwards and close the beaker with it.
  4. Heat the water and cook for 2 minutes or longer if the leather is thick. Steam should emerge from the visible scars.
  5. Place the leather piece inside the empty but still wet beaker and close it airtight with plastic wrap and a rubber band.
  6. Leave for 3-5 days at temperatures from 20-25°C. If the leather hasn’t developed any fat marks during the test, then no fat rash is to be expected by the end customer.


Other leather damages


Additional information


Colourlock-GB-03.jpg

WE UNDERSTAND LEATHER - WWW.COLOURLOCK.COM