Fatty spue - Fat marks on leather
Fatty spue
"Fatty spue" is stains caused by residual fat from the leather that show up on the surface due to temperature and humidity fluctuations. Visually, it is always a whitish coating, which at first glance looks like white mould. The causes of fat or grease marks on the leather surface are different and affect several steps in the tanning process. Inadequate degreasing of natural fats in the skin, as well as the oils and fats used for rehydration can promote fat rashes.
Fatty spue inoffensive. They emerge almost exclusively in leather clothing and leather bags. Car interiors, shoes and upholstery leathers are rarely affected.
Unfortunately for the tanner, this phenomenon does not arise immediately after the production of the leather, but weeks later. Most of it happens whilst still inside the transporting container or when the leather items are packed in plastic. Changes in humidity play a big role and once it shows up on the surface, it will reoccur despite cleaning attempts.
Unlike with mould, heating can make fat temporarily invisible.
There are two situations on which fatty spue can occur:
Firstly, fat marks are common in new material, which was manufactured in Asia and containers have long transport routes. Goods packaged in plastics in very humid places cause excess fats to sweat out. Mostly the complete shipment is concerned.
On the other hand, fat marks appear on old leathers treated with waxy care products. Excess sweating can occur when temperatures or humidity go up.
Often fatty spue is mistaken for mould. To check if it is mould or fat, carry out is a simple test. If you hold a hair dryer and apply slightly warm air on the affected area, the wax or grease melts and disappears temporarily. Mould would remain unchanged even if the surface is heated.
Light fat marks can be kept under control with this method. After a single treatment with the hair dryer, it is already almost gone as fat on leather reacts quickly to heat.
After one-time treatment with the hair dryer, the greasiness is almost gone. Grease on leather reacts quickly to heat.
For not too intensive fat stains on water resistant leathers, following this procedure is recommended: Clean the leather with a mixture 1:10 of COLOURLOCK LEDER FEIN LEATHER AND FUR WASH CONCENTRATE and water. Apply thin layers of the solution using a wet cloth and let dry on its own or use a hair dryer to speed up the process. Protect the surface with the COLOURLOCK LEDER FEIN LEATHER CARE AND WATERPROOFING OIL. Although this cannot guarantee that the problem will not reoccur, this method is much faster than the constant blow drying and wiping. More solid fat or wax which causes the stain is diluted gradually and loses its effect.
Fatty spue on gloves made of suede and on shoes, both from Asian containers.
Fatty spue on a satchel.
Fatty spue caused by excess care product treatment of old leather: Saddlebag and pistol holster.
Cars with fat marks: Toyota, BMW Mini, VW Beetle.
In the last few years, the problems of fat marks on leather furniture have increased.
At first glance not clear, but tests revealed they were fat marks.
Testing fatty spue
This test has been developed by Gerber Anderas Ollert. Even if he was not scientifically verified, his testing work has always been helpful.
- Add 50-100 ml of tap water in a 500ml lab beaker with a large opening.
- Cut a piece of leather to be tested so it fits the beaker. Fix the leather with a rubber band over the opening of the beaker. The leather piece should also fit into the container.
- Place the leather with the grain side upwards and close the beaker with it.
- Heat the water and cook for 2 minutes or longer if the leather is thick. Steam should emerge from the visible scars.
- Place the leather piece inside the empty but still wet beaker and close it airtight with plastic wrap and a rubber band.
- Leave for 3-5 days at temperatures from 20-25°C. If the leather hasn’t developed any fat marks during the test, then no fat rash is to be expected by the end customer.
Other leather damages
- Typical leather damages such as aging, fading, grease stains, discolouration etc.
- Dye transfer from leather
- Typical damage to PU leather in the furniture area
- Flamingo effect: Reddish discolourations on bright furniture in concealed areas
- Bronzing: Metallic glimmer on new leather
- Glue migration from the back side to the visible side of the leather
- Mouldy leather
Additional information
a kotori web solution