Crust leather

From www.leather-dictionary.com - The Leather Dictionary
Revision as of 18:05, 21 February 2017 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

LEATHER-DICTIONARY.jpg


Crust leather

Crust leather is the term applied to leather, which is dried after tanning but has not yet been dyed. In the case of chrome-tanned leather, this is known as "chrome crust" and, for vegetable-tanned leather, as "vegetable crust".

Crust leather is rarely processed as it is. Usually, the leather is dyed and finished before processing.


Anilinoffen.jpg Wet-blue.jpg

Wet-Blue-04.jpg

Vegetable crust - Chrome crust

 

Blankleder Flecken01 1205.jpg Wuerfelbecher-001.jpg

Vegetable tanned crust leather processed.

 

Chrome-crust-belt-02.jpg

Unusual: Chrome crust processed. The colouration with chromium only is unattractive and therefore a cheap solution.

 

Crusting

Crusting is part of the steps for leather production. The main stages in the leather production process are called, preparatory stages, tanning, crusting and surface coating.

Crusting is when the hide is thinned, retanned and regreased. Often a dye process is included in the crusting. Also, part of the crusting process involves drying and softening.


Crusting may include the following working steps depending on the type of leather:

  • Splitting: The leather is split into one or more horizontal layers.
  • neutralisation: The pH of the leather is adjusted.
  • Retanning: Additional tanning imparts properties.
  • Dying: The leather is coloured in the drum.
  • Fixation: Unbound chemicals are chemically bonded or removed from the fibres.
  • Whitening: The colour of the leather is lightened.
  • Fatliquoring and Stuffing: Fats, oils and waxes are added between the fibres to soften the leather.
  • Shaving: The leather is thinned using a machine which cuts leather fibres from the flesh side.
  • Wetting and Conditioning: Leather has to be rehydrated depending on the following working steps.
  • Sammying: Water is squeezed out the leather.
  • Drying: The leather is dried to different moisture levels.
  • Filling: Dense chemicals are added to make the leather harder and heavier.
  • Stripping: Superficially fixed tannins are removed.
  • Softening: Physical softening of the leather by tumbling and stacking.
  • Buffing: Abrasion of the surfaces of the leather to reduce nap or grain defects.



Additional information


Colourlock-GB-03.jpg

WE UNDERSTAND LEATHER - WWW.COLOURLOCK.COM