Difference between revisions of "Soiling behavior - Anti-Soiling"
m |
|||
| Line 4: | Line 4: | ||
| − | + | Soiling behaviour is the term used to describe a leather's susceptibility to becoming soiled and [[leather damages#Dye transfer on leather|discoloured]]. It is determined by the [[Finish#Primer - Finish / Top Coat|Top Coat]], which is the top layer on the leather. Often "anti-soiling" additives are included in the top coat to reduce stains. | |
| Line 15: | Line 15: | ||
<p> </p> | <p> </p> | ||
| − | In order to test discolouration, a denim fabric is put into an alkaline sweat solution and then rubbed over the leather surface. The [[leather damages#Dye transfer on leather|discoloration]] is measured by comparison with an untreated area. Especially [[Gloss of leather|matt]] and light leather | + | In order to test discolouration, a denim fabric is put into an alkaline sweat solution and then rubbed over the leather surface. The [[leather damages#Dye transfer on leather|discoloration]] is measured by comparison with an untreated area. Especially susceptible are [[Gloss of leather|matt]] and light leather. |
| Line 31: | Line 31: | ||
<p> </p> | <p> </p> | ||
| − | By changing the [[leather colour|leather colours]] and [[Finish#Primer - Finish / Top Coat|top coats]] to water-based systems, | + | By changing the [[leather colour|leather colours]] and [[Finish#Primer - Finish / Top Coat|top coats]] to water-based systems, light leather has become even more susceptible to soiling and [[leather damages#Dye transfer on leather|discolouration by clothing]]. The growing trend towards [[Gloss of leather|matt]] leathers is probably also a factor. Even the more modern foam coatings with rough surfaces could have an influence on this phenomenon. |
| − | Old [[leather furniture|furniture]] and vintage [[car leather|cars]] | + | Old [[leather furniture|furniture]] and vintage [[car leather|cars]] tend to be immune to the problem of "[[leather damages#Dye transfer on leather|jeans dye transfer]]" whereas new cars and furniture are susceptible to stains and discolouration caused by dye transfer from trousers, jackets or belts. Customers often notice this problem when the old furniture, or the old car, is replaced by a new one and the sensitivity increases significantly in comparison. |
| − | Products and methods | + | Products and methods for reducing this sensitivity are referred to as "anti-soiling". In response to the increasing number of complaints, the chemical industry has provided the [[tannery]] [[finish]] additives with anti-soiling properties. Additives in the [[Finish#Primer - Finish / Top Coat|top coat]] with "anti-soiling" properties reduce the soiling to some extent. So far, however, the sensitivity has not yet returned to levels when solvent based products were used. |
Revision as of 18:09, 25 January 2017
Soiling behaviour is the term used to describe a leather's susceptibility to becoming soiled and discoloured. It is determined by the Top Coat, which is the top layer on the leather. Often "anti-soiling" additives are included in the top coat to reduce stains.
On pigmented leathers, the dirt settles in the grain structure.
In order to test discolouration, a denim fabric is put into an alkaline sweat solution and then rubbed over the leather surface. The discoloration is measured by comparison with an untreated area. Especially susceptible are matt and light leather.
Typical jeans stains.
By changing the leather colours and top coats to water-based systems, light leather has become even more susceptible to soiling and discolouration by clothing. The growing trend towards matt leathers is probably also a factor. Even the more modern foam coatings with rough surfaces could have an influence on this phenomenon.
Old furniture and vintage cars tend to be immune to the problem of "jeans dye transfer" whereas new cars and furniture are susceptible to stains and discolouration caused by dye transfer from trousers, jackets or belts. Customers often notice this problem when the old furniture, or the old car, is replaced by a new one and the sensitivity increases significantly in comparison.
Products and methods for reducing this sensitivity are referred to as "anti-soiling". In response to the increasing number of complaints, the chemical industry has provided the tannery finish additives with anti-soiling properties. Additives in the top coat with "anti-soiling" properties reduce the soiling to some extent. So far, however, the sensitivity has not yet returned to levels when solvent based products were used.
Stains caused by a leather belts.
Additional information
a kotori web solution