Difference between revisions of "Laser engraving - Laser cutting leather"
Line 10: | Line 10: | ||
==Laser engraving leather== | ==Laser engraving leather== | ||
− | To burn motifs in leather, leather is lasered. With today's technology, image files can be burned into a leather using a laser. The laser is set to burn the upper layers of the leather so that the surface is dark but not too deep damaged. | + | To burn motifs in leather, leather is lasered. With today's technology, image files can be burned into a leather using a laser. The laser is set to burn the upper layers of the leather so that the surface is dark but not too deep damaged. A laser is mostly used on uncoloured [[Vegetable-tanned leather|natural leather]], but also on [[finish|pigmented leather]]. On pigmented leathers, only the upper layer of the paint layer is burned. |
− | To facilitate subsequent | + | To facilitate subsequent colouring of the lasered surface, a film may be glued before the laser, which then burns with it. Before the film is peeled off, the leather can then be coloured in the laser recesses without colouring un-lasered areas. |
Line 29: | Line 29: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
− | ''Template -> [[Finish|Pigmented]] | + | ''Template -> [[Finish|Pigmented]] lasered leather. The laser was too deep on the right side.'' |
</p><p> </p> | </p><p> </p> | ||
Line 52: | Line 52: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
− | ''Lasered leather motif as a birthday gift (original and | + | ''Lasered leather motif as a birthday gift (original and lasered) by [http://www.ledermanufaktur.com www.ledermanufaktur.com].'' |
</p><p> </p> | </p><p> </p> | ||
Line 60: | Line 60: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
− | '' | + | ''Colourful of [http://www.leder-speed.de/Styling.html www.leder-speed.de].'' |
</p><p> </p> | </p><p> </p> | ||
Line 73: | Line 73: | ||
</p><p> </p> | </p><p> </p> | ||
− | ==Laser engraving leather [[fur]]== | + | ==Laser engraving leather [[Fur - Fur skin|fur]]== |
− | + | Als,o [[cowhide#Cowhide with fur|leather with hair]] and [[Fur - Fur skin|fur]] can be patterned by laser. This technique is usually applied to [[cowhide]]. | |
Line 91: | Line 91: | ||
==Laser cutting leather== | ==Laser cutting leather== | ||
− | + | Leather can also be cut with a laser. However, since the laser is a burn process, the [[Leather smell|leather smells]] accordingly and the soot of the cut edges can soil. It is therefore always necessary to check whether [[Hole punching|punching]] or [[Leather cutting|knife or waterjet cutting]] is the better alternative. | |
Revision as of 20:05, 26 December 2016
Contents
Laser engraving leather
To burn motifs in leather, leather is lasered. With today's technology, image files can be burned into a leather using a laser. The laser is set to burn the upper layers of the leather so that the surface is dark but not too deep damaged. A laser is mostly used on uncoloured natural leather, but also on pigmented leather. On pigmented leathers, only the upper layer of the paint layer is burned.
To facilitate subsequent colouring of the lasered surface, a film may be glued before the laser, which then burns with it. Before the film is peeled off, the leather can then be coloured in the laser recesses without colouring un-lasered areas.
Natural leather lasered (www.leder-speed.de). - Lasered pedigree of the company Posenanski (www.ledermanufaktur.com).
Template -> Pigmented lasered leather. The laser was too deep on the right side.
Lasered pattern on black goatskin by www.capturing-the-essence.com.
Lasered knife sheath and motorcycle saddle of www.ledermanufaktur.com.
Lasered leather motif as a birthday gift (original and lasered) by www.ledermanufaktur.com.
Colourful of www.leder-speed.de.
Under the microscope, the lines of the laser get visible. The upper photo is pigmented leather, below is natural leather without surface colouring.
Laser engraving leather fur
Als,o leather with hair and fur can be patterned by laser. This technique is usually applied to cowhide.
Cowhide can be patterned by laser (www.richter-leder.de).
Laser cutting leather
Leather can also be cut with a laser. However, since the laser is a burn process, the leather smells accordingly and the soot of the cut edges can soil. It is therefore always necessary to check whether punching or knife or waterjet cutting is the better alternative.
Laser cut leather.
Video about motifs on leather
A video about painting on leather, perforating leather, carving leather, embossing leather and several other methods to create motifs on leather.
Other possibilities how to provide leather with designs
- Embossed leather
- Carving leather
- Perforated leather
- Hole punching
- Embroidery
- Leather seams
- Leather imprint
- Formed leather
- Painting on leather
- Braided leather
- Leather etching & engraving
- Leather tattoo
- Glued leather strips
- Burning designs on leather