Waterproofing leather

Waterproofing - Reproofing - Impregnation

Leather is waterproofed or hydrophobed to ensure water does not penetrate the surface. Leather specialists call it "hydrophobic leather" and end customers call it "waterproofed leather". Usually, shoe and clothing leather is already hydrophobed in the tannery to make it more weather-resistant.

A waterproofing treatment is only need for leather which is sensitive to dampness and soiling (all porous leather like nubuck and suede and aniline leather). Waterproofing is usually applied by end consumers as an aerosol spray to renew the water-repellent properties.

Advantages when moisture cannot enter into porous leather:

Breathing activity is reduced by water drawn in. A completely wet shoe or a completely wet jacket is no longer breathable.
Feet don't get wet and also the rest of the body is protected from moisture and cold (leather pants, leather jackets, leather hats, leather gloves).
The leather objects don't get heavy due to penetrating water.
The stain sensitivity caused by water marks is reduced.
Sensitive leather looks used and becomes stiffer after becoming wet entirely.
Waterproofing treatments can also reduce certain types of soiling.

A surface colouring is the best protection, but the leather does not feel so natural.

Important! A waterproofing never makes a leather as water-repellent as a surface colouration. Waterproofing does not completely protect. Sensitive leather should not be exposed to bad weather despite waterproofing.

Suede, nubuck and aniline leather should not be exposed to excessive moisture, even with good impregnation!

Important! Sprayed waterproofing can damage the lungs. Therefore, always observe the safety instructions. If sprayed outside and not positioned in the spray mist, there is no danger. The highest danger is spraying in small, enclosed rooms without ventilation. The lung does not absorb any oxygen and suffocates. Therefore, the products are marked with a strong smell to avoid inhalation.

The most effective are aerosol and solvent based waterproofing products. At the first treatment, waterproofing must be applied several times and must be sufficiently dried. Heat increases the water-repellent effect.

500px

COLOURLOCK WATERPROOFING SPRAY FOR NUBUCK, SUEDE & FABRICS

By applying an aerosol water-repellent, the breathability of the leather is reduced by about 5 to 10 percent. Since waterproofing is generally applied to very porous leather, this reduction can be neglected.

Important! Waterproofing is frequently seen as "leather care". However, water-repellents only have the function of preventing water penetration. Leather care is to preserve the good condition of a leather as long as possible. In addition to protecting against the penetration of moisture, leather also needs a re-greasing depending on the type of use, so that it remains soft and / or UV filters, so that it does not fade and / or frictional wearers so that it does not wear so quickly. Therefore, waterproofing should never be considered to be sufficient "leather care", but only as moisture protection. The leather would otherwise dry out and get brittle over time.

Warning sign of a leather pants made of stretch leather.

In case of very porous aniline leather, an intensive waterproofing is not a sufficient protection. These are "nice-weather" boots.

Waterproofing doesn't make sense on surface-coloured leathers. Waterproofing does not have any care properties despite making water-repellent. It makes more sense to maintain such leather with a suitable care product.

The first picture shows a drop of water on a pigmented cowhide. The drop does not penetrate the leather. On the other pictures the drop of water sinks into a porous aniline leather.

When water enters porous leather, the leather fibre can swell and it can change the surface and height structure. This is typical for aniline leather, which were not waterproofed during production.