History of chrome tanning
Until the 19th century, there was little development in the tanning process. While there was some use of alum (aluminium) salts and other tanning methods, vegetable tanning was the most prevalent. In 1858, chrome tanning was invented by the German technologist Friedrich Knapp and Hylten Cavalin from Sweden. However, it was an American chemist called Augustus Schultz who first patented the chrome tanning process.
Beginnings of chrome tanning: Ball of chrome-tanned cow leather from before 1920 (© German Ledermuseum, C. Perl-Appl).
In the following decades, chrome tanning became the most common and dominant form of tanning. One of the main reasons why it was adopted so rapidly is that the process was much faster than vegetable tanning. The invention of chrome tanning coincided with the discovery of the fatliquoring (regreasing) process and also the development of synthetic dyes. Together these changes to the chemistry of leather production led to chrome tanning becoming the preferred method. Chromium salts belong to the group of mineral tannins.
Immediately after tanning, the leather is still wet and is tinged with blue, hence it is also referred to as wet blue.
Chromium (III) oxide in powder form.
The global importance of chrome tanning
Chrome tanning with chromium (III) salts accounts for around 85 percent of global leather production (as per 2014). 95% of shoe upper leather, 70% of leather upholstery (but decreasing in favour of FOC-leather) and almost 100% of clothing leather are chrome tanned.
Although it has twice the tensile strength of vegetable tanned leather, chrome-tanned leather weighs less because the skin does not fully absorb the chromium salts used for tanning. The tannin makes up just 4% (with newer leathers only about 1.5%) of the leather weight, while vegetable-tanned leather has a tannin content of about 20 percent.
Chrome-tanned leather is more easily hydrophobized compared to other tanning alternatives and the leather can be softened more easily. The tanning process is faster and requires less tanning chemistry than vegetable-tanned leather.
Cost saving: Freshly tanned wet blue with its characteristic bluish tint is globally transportable and can be stored well. This facilitates unlimited international sales and global processing.
Chrome tanning in the tanning drum.
|Area||Chrome-tanned leather in %||tendency|
|Shoe upper leather||95||No change|
|Furniture leather||70||Decrease in favour FOC-leather)|
|Car leather||50||Decrease in favour FOC-leather)|
|Garment leather||100||No change|
|Bags, belts, accessories||60||No change|
|Sole leather||-||No change|
Source: Journal leather & skins market - Leder & Häute Markt 3/2008, page 46.
"Wet blue" = damp, grey-bluish leather dyed right after chrome tanning by chromium.
The chrome-tanning agent nearly always contains 33% basic chromium sulphate and 26% chromium (III) oxide. Annually 480,000 tonnes are produced in chrome tanning worldwide, which is about 125,000 tonnes of chromium (III) oxide. The use of chromium (III) salts is considered harmless to health and does not cause difficulties in the vast majority of people, despite intensive skin contact in footwear or apparel. Drinking water is allowed to contain 50 micrograms (chromium III) per litre.
Major suppliers of chromium are South Africa with 38%, India 20%, Kazakhstan 15%, Turkey with 7%, Russia, Brazil and Zimbabwe each with 3% and Finland with 2%.
Chrome-free leather - FOC = Free of Chrome
FOC (free of chrome, chrome-free) labelled leather is tanned with tannins that do not contain chromium (III). They are now increasingly used in automotive upholstery and furniture upholstery. The leather seats of Audi and Porsche are always free of chrome.
The production of FOC-leather is more complex than that of the chrome-tanned leather. For example, in the tanning process, an exact temperature must be reached to tan successfully. FOC leather is mostly produced in developed countries.
Frequently chromium-free leather is advertised with descriptions such as "without chromium and pollutants". This can give the impression that chrome tanning is harmful, whereas tanning with chromium III is absolutely harmless. Many people associate "chrome" with toxic or may have read in the press about the transgressions involving content of chromium VI. Marketing campaigns for FOC leather usually exaggerate these fears.
FOM (free of metal) is the name for leather that has been tanned completely without the use of metals and their compounds (such as aluminium, iron or titanium).
Currently, chromium tanning is extremely dominant. Alternative tanning methods are unable to replace it, mainly due to costs and technical considerations. Many vegetable tanning agents occur naturally but they are not readily available in sufficient enough quantities yearly to satisfy the demand for leather production worldwide.
Chromium (VI) is harmful and can occur in the leather as a result of improper tanning conditions. However, following thorough research, this can be avoided.
Chrome tanning - Ecology
Environmental considerations with respect to chrome tanning are also important. The chromium-containing waste water and waste materials must be recycled to recover valuable materials. Modern tanneries manage to bind up to 97% of the chromium used in the leather fibre, to keep the waste water load low and to save costs.
Correct disposal of chrome-tanned leathers is crucial. For example, leather seats in scrapped cars require appropriate handling because combustion of chrome-tanned leather can produce harmful chromium (VI). Formation behaviour of chromium (VI) under conditions of high heat (bright sunlight on black car upholstery or dashboard leather) should also be reviewed regularly.
- Vegetable-tanned leather
- Mineral tanning
- Synthetic tanned
- Chamois leather
- Tawing with alum
- Brain tanning
Video about leather production
|Chrome tanning - Vegetable-tanned leather - Synthetic tanning - Tanning with fats and oils|